一,机床结构电解成形磨削的原理如图一所示,其机床结构和一般的机械磨削机床並没有太大的差别,也具有磨轮主轴,工件的进给机构,旋转机构等装置,但是,在机械磨削中由于产生磨削热,需要探用浅切涤(百分之几毫米)和快速进给的方式(5～30米/分)而在电解磨削中,为了提高加工效率,希望磨轮和工件的接触面积尽可能的增大, First, the machine structure Electrolytic grinding principle shown in Figure 1, the machine structure and the general mechanical grinding machine and not much difference, but also with the grinding wheel spindle, the workpiece feed mechanism, rotating mechanism and other devices, but , In the mechanical grinding due to the generation of grinding heat, the need to explore the shallow cut (a few percent) and rapid feed (5 ~ 30 m / min) and in electrolytic grinding, in order to improve the processing efficiency , I hope the wheel and the workpiece contact area increases as much as possible,