经验两例一线切割机床的冷却液喷嘴一般由有机玻璃制成，由于任务重，所以我们的更换的非常频繁。其主要原因是抖丝或断钢丝的抽力所造成。冷却液供给不良，会加速铂丝损耗，缩短铝丝寿命，甚至造成断丝。为了解决这一问题，我在喷水嘴的一面加一个上钢管，问题便迎刃而解... Experience of two cases of first-line cutting machine coolant nozzles are generally made of plexiglass, due to heavy tasks, so we replace very frequently. The main reason is that shaking wire or broken wire caused by the pumping force. Poor coolant supply will accelerate the loss of platinum wire, shorten the life of aluminum wire, and even cause broken wire. In order to solve this problem, I put a pipe on the side of the nozzle, the problem will be solved ...