混合有源滤波器无源网络的内部电磁兼容性分析

来源 :电力系统自动化 | 被引量 : 0次 | 上传用户:sjuser
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
首先建立了混合有源滤波器无源网络的内部电磁干扰模型,根据三相电流和磁感应压降之间的矢量关系,推导出无源网络等效电抗和等效电阻的数学表达式,以及品质因数和谐振带宽受电磁干扰影响的变化规律。具体分析了三相电抗器摆放位置和间距对上述性能参数的作用特点及强度.指出对称摆放三相电抗器是优化混合有源滤波器无源网络内部电磁兼容性的有效措施。实践验证了文中的电磁兼容性矢量分析方法和结论的有效性和实用性。 First, the internal electromagnetic interference model of the hybrid active power filter passive network is established. According to the vector relationship between the three-phase current and the magnetic voltage drop, the mathematical expressions of the equivalent reactance and equivalent resistance of the passive power network are deduced. Variation of Factors and Resonant Bandwidth Affected by Electromagnetic Interference. The characteristics and intensity of the three-phase reactor placement and spacing on the above performance parameters are analyzed in detail.It is pointed out that the symmetrical placement of three-phase reactor is an effective measure to optimize the electromagnetic compatibility of the passive network of hybrid active filter. The validity and practicability of the electromagnetic compatibility vector analysis method and conclusion in the paper are verified by practice.
其他文献
A new steel making process through reduction and sintering treatment of cementite powder was proposed, and microstructure of the material obtained by this proce
针对水闸闸墩、渡槽槽壁、地涵边墙、船闸边墙和导流墙等水工墩墙型混凝土结构在施工期经常会防不胜防地出现裂缝的现象,在理论上探讨了这种裂缝产生和扩展的机理,认为墩墙混
To downsize and lighten automatic transmission components, the gears installed must be strengthened in terms of pitting endurance and/or wear resistance. The mo
为研究变压器合闸过电压的机理测试了220 kV牵引变电站主变空载合闸过程,波形及数据的综合分析显示系统过电压为高频振荡.ATP-EMTP模型的仿真结果表明,合闸相角、系统阻抗、
The heat treatment, including two steps, was proposed to obtain Fine Fully Lamellar (FFL) microstructure on TiAl containing minor Ni. The first step was in (α+
The valence electron structure (VES) in compound layer of steel plasma-nitrided at 560℃ with rare earth (RE)addition was calculated based on the empirical elec
A surface engineering approach for a novel pre-treatment of hard metal tool substrate for optimum adhesion of diamond coatings is presented. Firstly, an alkalin
亚波长光栅因光栅参量的不同而具有不同的衍射特性 ,通过对亚波长光栅参量的合理设计来实现消偏振窄带滤波是一种新的方法与途径。首先分析了基于共振异常的窄带滤波的物理机
Diffusion layers produced on carbon steel surface in vacuum titanizing process were investigated. Studies of layers thickness, their morphology, titanium, carbo
Coated tools are widely used in todays metal cutting industries and have significantly improved machining productivity through reducing operation costs and time