论文部分内容阅读
将两片35mm×50mm、厚0.5 mm不锈钢片加工成L型,夹在两块长方形的透明CD盒片之间,两块不锈钢片之间留一个宽5 mm的通道,通道两端,各粘一段直径约4 mm、长200 mm塑料软管,然后用AB黏合剂密封,用2条截面24mm×11mm、长61 mm的条形磁铁相对置,将两块35mm×65mm、厚0.5 mm长方形的透明塑料片夹住后,便做成了磁流体发电机主体。用可乐瓶、自行车气门、塑料
Two pieces of 35mm × 50mm, 0.5mm thick stainless steel sheets are processed into L shape, sandwiched between two rectangular transparent CD boxes, a 5mm wide channel is left between the two stainless steel sheets, the two ends of the channels are sticky A length of plastic tubing about 4 mm in diameter and 200 mm in length was sealed with an AB adhesive and two strips of 24 mm × 11 mm and 61 mm long were opposed to each other using bar magnets. Two 35 mm × 65 mm, 0.5 mm Clamped after the transparent plastic sheet, it made a magnetic fluid generator body. Coke bottle, bicycle valve, plastic