电磁注入等效替代辐照理论模型及实现技术

来源 :高电压技术 | 被引量 : 0次 | 上传用户:wodemeng111
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
针对高强度辐射场(HIRF)实验室条件下无法构建,单纯辐照法难以有效开展系统级电磁辐射敏感度及安全裕度试验的问题,对电磁注入等效替代辐照理论、方法及实现技术进行了研究。本着有限目标的原则,针对典型互联系统,以设备端口的响应信号相等作为等效依据,建立了注入替代辐照的等效模型和强场条件下注入电压源外推模型,基于Baum-Liu-Tesche(BLT)方程和传输线阻抗分析理论,给出了互联传输线终端响应的计算方法,确定了注入法等效替代辐照法应满足的2个条件,即等效激励源相等和激励源输出阻抗相等,理论推导了注入电压与辐照场强之间的等效对应关系。采用注入耦合模块作为辅助试验设备,实现了互联系统中前向电压信号的提取、干扰信号的注入以及正常传输信号的有效监测;提出的注入与辐照相结合的互联系统电磁辐射效应试验方法,为正确评价互联系统的电磁辐射敏感度与安全裕度提供了切实可行的研究手段和技术支撑。 In order to overcome the shortcomings of HIRF experiment in laboratory conditions, it is difficult to carry out system-level electromagnetic radiation sensitivity and safety margins test with pure irradiation method. The equivalent electromagnetic radiation substitution theory, method and technology Were studied. According to the principle of limited target, aiming at the typical interconnected system, equivalent signal of equivalent input of equipment port is taken as the equivalent basis, an equivalent model of injection alternative irradiation and an extrapolation model of injection voltage source under strong field are established. Based on Baum-Liu -Tesche (BLT) equation and impedance analysis theory of transmission line, the calculation method of the terminal response of interconnected transmission line is given, and two conditions which are equivalent to the alternative irradiation method for injection are determined, that is, the equivalent excitation source is equal and the excitation source output Equal impedances, the equivalent derivation of the injection voltage and the radiation field is deduced theoretically. The injection coupling module is used as the auxiliary test equipment to realize the extraction of the forward voltage signal, the injection of the interference signal and the effective monitoring of the normal transmission signal in the interconnected system. The proposed electromagnetic radiation effect test method of the interconnected system combining the injection and the irradiation, In order to correctly evaluate the sensitivity and safety margins of the electromagnetic radiation of the interconnected system provides practical research methods and technical support.
其他文献
摘要:提出了一种基于多重信号分类(multiplesignalclassification,MUSIC)与模式搜索算法(patternsearchalgorithm,PSA)的异步电动机转子断条故障检测新方法。MUSIC方法对于短时信号
摘要:定子单相短路故障是大型感应电动机的多发故障之一,故障发生时可能会导致绝缘损坏、转子损坏等问题。定量分析了电机故障状态下局部电磁力与电磁力波动态变化情况。提出了
以1台250Mw大型水轮发电机为例,建立了流体与固体耦合传热三维模型,采用共轭传热法对转子半个轴向段的流体场与温度场进行了计算。分析了磁极间隙内流体流动形态对励磁绕组冷却
提出了一种高光谱数据彩色显示策略,可在宏观、局部和微观三个级别上对图像信息进行更加丰富准确的可视化表达。该策略通过以下三种方法实现:根据类别空间相关性来分配彩色标签的方法,能够生成具有更好的类间可分性的彩色图像;基于方向裂片纹理技术的高光谱数据显示方法,能够同时表示地物的空间信息和光谱信息,且生成的图像具有良好的特征独立性和视觉直观性;定序饼图显示方法,不仅能够准确显示混合像素成分,还具有更好的类
具有五自由度全悬浮的磁轴承系统需要5个全桥结构开关功放。为提高开关功率放大器的集成度和母线电压利用率,提出五相六桥臂开关功放拓扑结构。该拓扑结构采用~种新型的混合电
该文从挂篮荷载计算、施工流程、支座及临时固结施工、挂篮安装及试验、合拢段施工、模板制作安装、钢筋安装、混凝土的浇筑及养生、测量监控等方面人手,介绍了S226海滨大桥
在我国特高压(ultra-high voltage,UHV)油气套管样机的试制过程中,套管尾部电场分布和均压球结构的优化是一项重要的研究内容。为此,详细介绍了改进粒子群神经网络混合算法(P
电磁脉冲(EMP)会对电子设备、器件以及系统的信号线路造成干扰、潜在性失效或永久性损伤,而传输线及其网络正是其主要的能量耦合通道,为研究注入式电磁脉冲对传输线网络的耦
为了满足核辐射条件下静电放电(ESD)瞬态脉冲场小空间测试的需要,基于有源电光调制法研制了一种经济实用的传感器,并利用该传感器搭建了光纤传输式瞬态电场测试装置。在介绍
静电放电(electrostatic discharge,ESD)抗扰度试验作为电磁兼容(EMC)试验的一项重要内容,其执行标准IEC 61000-4-2还存在诸多问题,尤其是空气式ESD的重复性问题。为此,基于