S195型柴油机起动轴上有长、短两个衬套。长衬套安装在机体上,安装时衬套上的油孔必须与机体的油孔对准,以使飞溅的机油能从此处进入,去润滑起动轴与长衬套。短衬套安装在齿轮室盖板上,安装时衬套上的油孔应与齿轮室盖板上的油孔对准,否则,起动轴与短衬套在运转中就会因得不到润滑而发热,进而从起动轴油封处向外冒烟,如果不及时停机解决,还会出现 S195 diesel engine starting shaft has a long, short two bushings. Long bushing mounted on the body, when installed on the bushing hole must be aligned with the body’s oil hole, so that splashing oil can enter from here to lubricate the starting shaft and long bushing. The short bushing is installed on the cover of the gear chamber. The oil hole on the bushing should be aligned with the oil hole on the cover of the gear chamber during installation. Otherwise, the starting shaft and the bushing will not be lubricated during operation And fever, and then smoke from the shaft seal at the start, if you do not promptly stop solution, there will be