论文部分内容阅读
北京鋁试验工厂子去年9月即部分地投入了生产。到目前为止,已经生产的有焙燒陽極电解槽39个,自焙連續陽極电解槽13个。本文想就北京鋁試验厂的生产实际,对焙燒陽極电解槽与自焙连续陽極电解槽作技术经济比较,供各地筹建小型鋁电解厂的参考。 (一) 技术方面的比较 39个焙燒陽極电解槽自去年9月开始启动至11月陆續走入正常生产。13个自焙阳极电解槽自12月开始启动,至今年1月才逐漸走向正常。因此,我們这里所介紹的是根据2、3月份的情况,而主要是根据3月
Beijing Aluminum pilot plant was put into production partly in September last year. So far, there are 39 baking anode electrolyzers and 13 continuous anode electrolyzers. Based on the actual production of Beijing Aluminum Test Plant, this paper makes a technical and economical comparison between baking anodic electrolyzers and self-baking continuous anodic electrolyzers for the preparation of small-sized aluminum electrolysis plants in various places. (A) Comparison of Technology 39 baking anodes electrolyzer started in September last year to November gradually into normal production. 13 self-baking anode cells started in December and only gradually went to normal in January this year. Therefore, what we have introduced here is based on the situation in February and March, but mainly on the basis of March