使用钢模板施工有很多优点,但在施工现浇混凝士水池、剪力墙等高厚体积结构需要留设穿螺栓孔时,不如木摸板方便。因此,我单位采用了钢木模混用的施工方法,即在需要穿孔设螺栓的部位,加一根10×5厘米的方木,在方木上打孔。钢模与木方之间采用夹具连接, The use of steel formwork has many advantages, but it is not as convenient as a wood feeler when a high-thickness volume structure such as a cast-in-place concrete pool or shear wall needs to be left with bolt holes. Therefore, our company adopted a construction method in which wood and steel molds were mixed. That is, a 10 x 5 cm square beam was punched in the area where the bolts were to be punched, and holes were punched in the square wood. The clamps are connected between the steel mold and the wood.