论文部分内容阅读
1.粉碎机的安装为了减少噪声和粉尘,中小型粉碎机大多安装在地坑内,粉碎室以下部分处于地坑内,进料斗在地表以上,并用木板隔开,既可减少噪声,降低粉尘,又有利于操作者行走。粉碎机安装在混凝土基础上,拧紧地脚螺丝,击料部分的风机、风管和集料筒的相互接口要密封。2.原料处理为了粉碎机的安全运行,原料在进入粉碎机前要清除各种杂物,以免堵塞甚至损坏粉碎机,降低饲料品质。小型粉碎机在进口处加装磁铁,使
1. Grinder installation In order to reduce noise and dust, most of the small and medium-sized shredders installed in the pit, smashing room below part of the pit, the feed hopper above the surface and separated with wood, both to reduce noise and reduce dust, Also conducive to the operator to walk. Shredder installed in the concrete foundation, tighten the ground screws, hit part of the fan, air duct and the collector to the mutual interface to be sealed. 2. Raw material handling In order to ensure the safe operation of the grinder, the raw materials must be cleaned before entering the grinder to avoid clogging or even damaging the grinder, thereby reducing the feed quality. Small grinder installed in the entrance magnet