论文部分内容阅读
5.什么时候需要低级格式化:硬盘的低级格式化需要磁头高速运转,对于硬盘本身具有一定的损伤,只有在用其它方法无法修复硬盘时才能考虑做此操作,比如硬盘无法分区、分区后硬盘空间丢失严重、硬盘分区并格式化后无法引导、出现太多的坏块等,在使用EIDE接口的机器上最好把硬盘置为NORMAL模式之后再进行低级格式化,这样将有更高的安全性,低级格式化一般需要较长的时间完成,且不要中途停止,否则将前功尽弃,重新再做无疑会加重硬盘的损伤程度。
5. When the need for low-level formatting: Low-level hard disk formatting requires high-speed head for the hard disk itself has some damage, only in other ways can not repair the hard disk to consider doing this operation, such as the hard disk can not be partitioned, partitioned hard disk The space is lost seriously, hard disk partitioning and formatting can not boot, there are too many bad blocks, etc., the machine using the EIDE interface is best to set the hard disk to NORMAL mode after low-level formatting, so there will be more security Sexual, low-level formatting generally takes a long time to complete, and do not stop halfway, or will give up, re-do will undoubtedly increase the degree of damage to the hard disk.