Twin crystal structured Al-10 wt.% Mg alloy over broad velocity conditions achieved by high thermal

来源 :材料科学技术(英文版) | 被引量 : 0次 | 上传用户:YT479102771
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Twin crystal structured Al-10 wt.% Mg alloys that were grown over a broad solidification velocity range were prepared and studied for the first time.The high thermal gradient (G) and growth velocity (V) of directional solidification resulted in the dominant solidification of twins: the twinned dendrite trunks at constant high Vs curved in the G direction with large angles in 7 mm diameter crucibles and invaded regular columnar grains because of a distinct kinetics growth advantage.Transitive deceleration experiments were designed to produce twin crystals that evolved with lower values of V (100,10,and 0.5 μm/s) and had a structural coarsening trend.Twin cell growth in the absence of arms occurred at a growth velocity of 10 μm/s.A coherency loss was observed at a growth velocity of 0.5 μm/s with straight coherent twin boundaries turning into curved incoherent boundaries.Linear theoretical analyses were performed to understand the structural evolution of the twins.These results demonstrate the possibility of producing dense and controlled twin crystals in the Al-Mg system under most industrial production conditions;thus,this approach can be a new structural choice for designing Al-Mg-based alloys that have widespread commercial applications.
其他文献
采用物理气相沉积工艺在黄铜H62垫片上制备了DLC薄膜,对DLC薄膜进行了拉曼光谱分析和截面形貌观察,测试了薄膜厚度、纳米硬度和结合力,进行了磨擦磨损试验,分析了薄膜的减摩
1.IntroductionrnDendritic structure are commonly encountered during solidification [1-4], especially in systems freezing with relatively low entropies of transf
期刊
The control of grain morphology is important in laser additive manufacturing (LAM),as grain morphology further affects the hot cracking resistance,anisotropy,an
This study used the pseudo-spinodal mechanism to obtain the ultrafine α phase for designing high-strength titanium alloy.Diffusion multiple experiments were de
This study investigates the effects of fine and coarse undissolved particles in a billet of the Mg-7Sn-1Al-1Zn (TAZ711) alloy on the dynamic recrystallization (
A phase-field model coupling with elastoplastic deformation and creep damage has been built to study the microstructural evolution and deformation behavior for
通过化学成分检测、室温力学性能分析以及金相组织观察、形貌观察、腐蚀产物分析等方法,分析了铜合金截止阀阀瓣密封腐蚀的原因.结果 表明,截止阀阀瓣成分、组织及性能均满足
Phase field simulations incorporating contributions from chemical free energy and anisotropic interfacial energy are presented for the β→α transformation in
A grain-size gradient NiTi ribbon with multiple-step shape transition was papered by means of melt-spinning.The ribbons contain coarse and fine grains in the fr
The increasing utilization of titanium alloys in marine environments makes their microbiologically influenced corrosion study a timely matter.This work demonstr