论文部分内容阅读
沼气池怎样正常启动?要使沼气池正常启动,首先,要选择好投料的时间,然后准备好配比合适的发酵原料,入池后原料搅拌要均匀,水封盖板要密封严密。一般沼气池投料后第二天,便可观察到气压表上升,表明沼气池已有气体产生。最初,要将产生的气体放掉(直至气压表降至零),待气压表再次上升时,在灶具上点火,如果能点燃,表明沼气池已经正常启动。如果还不能点燃,照上述方法再重试一次,还不行,则要检查沼气的料液是否酸化或其它原因。
How to start normal digester? To make digester normal start, first of all, to choose a good feeding time, and then ready to match the appropriate fermentation of raw materials, mixing into the pool after the raw material should be uniform, sealed water seal to be tight. General digester feed the next day, you can observe the barometer rise, indicating that methane gas has been produced. Initially, to release the gas generated (until the barometer dropped to zero), until the barometer rises again, the stove on the ignition, if it can ignite, indicating that the digester has started normally. If you still can not ignite, according to the above method and then try again, not enough, we must check whether the acid gasification of biogas or other reasons.