一、工作原理及其模拟如何合理模拟旋转动态扭矩是解决电、气动扭矩扳手校准时的一个关键性的问题,螺栓连接模拟器的设计从根本上解决了这个问题,它安装在扭矩传感器和电、气动扭矩扳手之间的连接件,可以实现动态扭矩向静态扭矩的转化。里面安装有垫圈,保证了柔性连接。其连接 First, the working principle and how to simulate a reasonable simulation of rotating dynamic torque is to solve the electrical and pneumatic torque wrench calibration of a key issue, the design of the bolt connection simulator fundamentally solve this problem, it is installed in the torque sensor and electricity , Pneumatic torque wrench connector between the dynamic torque can be achieved to the transformation of static torque. Washer installed inside to ensure a flexible connection. It’s connected