论文部分内容阅读
用于悬挂式惯性振动筛的弹簧缓冲器,有着复杂的结构,弹簧缓冲器主要是利用弹簧在压缩状态的工作原理。通常缓冲器由二个带有弹簧导向套的法兰盘组成。经过法兰盘侧面的孔穿通有钩环,而经过法兰盘的中心孔穿通挂钩杆,挂钩杆用螺帽固定在法兰盘上。挂钩杆、钩环和法兰盘的孔很快磨损是结构的缺点,此外,由于弹簧弹性的损耗,在它操作伸长时,振动载荷不均匀地传递在缓冲器的钩环上,引起筛分机架子损坏和挂钩杆断裂。作者推荐的弹簧缓冲器的结构主要是利用弹簧在
Spring buffer for hanging inertia shaker, with complex structure, spring buffer is mainly the use of the spring in the compressed state of the working principle. Normally the bumper consists of two flanged flanged bushings. Through the hole on the side flange through the hook ring, and through the center hole of the flange through the hook rod, hook rod nut fixed to the flange. The quick wear of the hooking rod, the shackle and the flange of the flange is a structural disadvantage. Furthermore, due to the elastic loss of the spring, when it is operated to extend, the vibration load is transmitted unevenly on the shackle of the bumper to cause the sifter Extension racks damaged and hook broken rod. The structure of the spring damper recommended by the author is mainly based on the spring