目前,拖拉机、汽车离合器摩擦片,多为铆钉铆接的,也有少数机型是胶接的。去除旧摩擦片的工作,好象是轻而易举之事,出现了用扁铲铲、起子撬等作法,人为造成从动盘钢盘翘曲变形。去除旧片是为了重铆新片,应以严格保持钢盘不翘曲变形为原则。 At present, tractors, automobile clutch friction plates, mostly riveted rivets, but also a few models are glued. Remove the old friction plate work, it seems to be easy things, appeared with shovel shovel, screwdriver pry and other practices, artificially caused by the disc disc bent deformation. Remove the old film is to riveting the new film, should be strictly maintain the steel is not warp deformation of the principle.