论文部分内容阅读
本标准适用于一般用单级和两级压缩的容积式空气压缩机(以下简称压缩机)的性能测定和简化的性能测定。本标准是参考国际标准化组织(ISO)《容积式压缩机——验收试验》制订的。 1.总则 1.1 压缩机性能测试的试验工况,应与有关标准规定的工况或供需双方商定的规定工况(以下简称规定工况)一致。测试过程中运转参数的允许波动范围按表1的规定。 1.2 由于客观条件限制,试验工况与规定工况不能取得一致时,允许运转参数与规定值之间的最大相对偏差及测试过程中运转参数的波动范围在符合表1的规定条件下,按本标准
This standard applies to the general use of single-stage and two-stage compression displacement air compressor (hereinafter referred to as the compressor) performance measurement and simplified performance measurement. This standard is to reference the International Organization for Standardization (ISO) “Positive displacement compressor - acceptance test” formulated. 1. General 1.1 Compressor performance test conditions, should be related to the conditions of the relevant standards or supply and demand agreed by both parties agreed conditions (hereinafter referred to as the conditions). The range of permissible fluctuation of operating parameters during the test shall be in accordance with Table 1. 1.2 Due to objective conditions, the test conditions and the provisions of the working conditions can not be agreed, the maximum allowable deviation between the operating parameters and the specified value and the operating range of fluctuations in the test parameters in line with the conditions specified in Table 1, according to this standard