论文部分内容阅读
与前建筑工程普遍推广使用了组合钢模板。但连接钢模用的U形卡用手工弯制十分困难,因此造价甚高。为降低工程费用,我们在钢筋弯曲机工作盘上稍加改进,革新成功了U形卡机械冷弯方法。经实际使用,该设备加工性能可靠,产品质量优良,受到了用户欢迎。一、设备特点本装置制造简便,价格低;产品生产成本低(每只不超过一角钱);采用冷加工方法,产品强度高,弹性好;生产效率较高
In combination with the former construction project, the combined steel formwork was widely used. However, the U-shaped card used to connect steel molds is difficult to bend by hand, and therefore the cost is very high. In order to reduce the project cost, we have made a slight improvement on the working disk of the steel bending machine. The U-shaped card mechanical cold bending method has been successfully developed. After actual use, the equipment has reliable processing performance and excellent product quality, which has been welcomed by users. First, the characteristics of the device The device is easy to manufacture, low price; product production costs are low (each not more than a dime); the use of cold processing methods, high product strength, good elasticity; high production efficiency