根艺博古架是以树根为材料,利用其干曲节突,根杈交错,色暗苍老等特点,经过精心拼接,细致琢磨制作而成。它错落有致,自然古朴,台盘叠起,一派古色古香。它既具有存放古玩的实用价值,又具有高雅的欣赏价值。如何制作简易根艺博古架(如图)?笔者的体会是如下:第一步,坯根加工。将树根放入水中浸泡一个月之后,捞出去皮,挑出根穴中的余泥,除去细根;将不要的侧根,从靠近主根约1～3cm的地方锯掉,同时锉圆锯痕;然后将其放入水中浸泡一两天,用细铜丝刷刷洗除去灰尘和残留的皮屑,放在阳光下晒干备用。第二步,拼接。根据坯根的形态和大小进行构思,然后按脑海中的雏形开始制作。总体办法是:选一块蟠根错节的根兜作为架底,用1～2根粗大而分根较多、形态扭曲的坯根作为架的主干。然后将主干与架底连接起来。它们的连接务必牢固稳定。为此,不能用一般的贴接法进行贴接,而要用公、母 The root art arbor ancient frame is based on the root material, the use of its dry song Festival sudden, root twigs staggered, color dark old and so on, after careful splicing, made of refined study. It is patchwork, natural simplicity, Taiwan plate stack, one school antique. It not only has the practical value of storing antiques, but also has elegant appreciation of value. How to make a simple root art arbor (Figure)? The author’s experience is as follows: The first step, blank root processing. After soaking the roots in the water for one month, remove the peeled skin and pick out the remnants from the roots to remove the fine roots. Cut the unwanted lateral roots from about 1cm to 3cm near the main root, Mark; then put it into the water for a day or two, brush with a thin copper wire brush to remove dust and residual dander, placed in the sun and dried for use. The second step, stitching. According to the shape and size of the blank root idea, and then press the prototype in mind to start making. The overall approach is: choose a Pancake wrong root pocket as a base, with 1 to 2 large and more root, the shape of the twisted roots as the backbone of the rack. Then connect the backbone with the bottom. Their connections must be solid and stable. To this end, can not use the general method of bonding paste, but to use male and female