论文部分内容阅读
该修整器可用来修整半径1～20mm的凸凹圆弧砂轮,它由固定到床身上的角铁1、支臂2、将手柄5固定到回转托座6上的螺钉3,调整垫片4、用螺钉9固定的上盖8、带金刚石11的金刚石座10和下盖12组成。为了使金刚石按照给定圆弧运动,在金刚石座方形尾部下垫一定厚度尺寸的薄板,并用螺钉7将其固紧。当手柄左右摆动时,便可修整出所需半径的砂轮。该修整器结构简单,使用方便,可提高被磨工
The dresser can be used to trim a radius of 1 ~ 20mm concave and convex circular arc grinding wheel, which is fixed to the bed body angle iron 1, arm 2, the handle 5 is fixed to the rotary bracket 6 screw 3, adjusting the gasket 4, The upper cover 8 fixed by the screw 9, the diamond seat 10 with the diamond 11 and the lower cover 12. To make the diamond follow a given circular arc, a thin sheet of a certain thickness is laid down on the square tail of the diamond seat and fastened with a screw 7. When the handle swings left and right, you can trim the wheel of the desired radius. The dresser is simple in structure, easy to use and can be polished