论文部分内容阅读
一、概况1960年8月武汉锅炉制造的一台 WG35—39—2型锅炉(即蒸发量35T/H,过热器出口压力39kg/cm~2,过热蒸汽强度450℃抛煤链条炉。于1969年10月安装在我厂投入运行。该炉锅简直径为φ1600 mm,壁厚46mm,长度8028mm,材质为~#20G,两侧各有一只上短联箱,用工字钢和槽钢固定。四根φ60×3引出管由上短联箱接至锅筒。前水冷壁管φ60×3,有36
I. Overview In August 1960, a WG35-39-2 boiler manufactured by Wuhan Boiler (ie, evaporation of 35T / H, outlet pressure of superheater of 39kg / cm ~ 2 and overheat steam intensity of 450 ℃) was adopted in 1969 It was put into operation in our factory in October of this year.The boiler has a diameter of φ1600 mm, a wall thickness of 46mm and a length of 8028mm. It is made of ~ # 20G and has a short header on each side. It is fixed with I-beam and channel. Four φ60 × 3 lead-out pipe connected to the drum by the short header box before the water wall tube φ60 × 3, there are 36