我厂给C9215液压多刀半自动车床的前刀架设计了一种可以自由调整尺寸的活动刀夹。原刀夹是用一整块45号钢刨削而成的。 C9215前刀架的径向移动范围极小,是用调整死挡铁的方法来控制其移动尺寸的。在车削过程中,往往需要调整车削尺寸,由于死挡铁上没有刻度盘,且位置隐蔽,用板手拧很不方便,尺寸只能靠估计,因而常在 I plant to C9215 hydraulic multi-knife semi-automatic lathe front turret designed a freely adjustable size of the active tool holder. The original tool holder is a piece of 45 steel planing made. C9215 front turret radial movement range is very small, is to adjust the way the dead stop iron to control the size of its movement. In the turning process, often need to adjust the turning size, because there is no dial on the dead gear, and the location of concealment, hand-screwed with a very inconvenient, the size can only be estimated, so often