行输出管(以下简称“行管”)损坏后,往往会遇到新换后再损坏的情况,造成不必要的损失,甚至使初学者不敢再开机检测,所以行输出管安装后进行安全检测来判断原发性故障因素很重要。根据经验,介绍自己的实践检测方法步骤。检测流程图如图1所示。 Line output pipe (hereinafter referred to as “pipe”) is damaged, often encounter new replacement and then damaged, resulting in unnecessary losses, and even beginners dare not boot detection, so the output pipe installed after the safety Testing to determine the primary fault factor is very important. Based on experience, introduce your own practice testing method steps. Test flow chart shown in Figure 1.