一、引言我厂生产的卷烟铝箔,已有五十多年的历史。最早生产的方法是采用线裱的方法,即将水溶性粘结剂分条涂敷在基材坯料上,粘结剂条在湿状态下同被贴合坯料相贴合,通过干燥装置烘干后进行卷取而成。部分产品采用全裱生产方法,即将水溶性粘结剂均匀涂在基材坯料上,粘结剂膜在湿状态下同被粘合坯料相贴合,再经过干燥装置将剩余 First, the introduction I plant the production of aluminum foil, has more than 50 years of history. The earliest production method is the use of wire mounting method, the water-soluble adhesive is applied to the substrate blank, the adhesive in the wet state with the paste is attached to the blank, dried by the drying device Made of coiled. Part of the product using full-mounted production method, the water-soluble binder is evenly coated on the substrate blank, the adhesive film in the wet state with the bonded blank phase paste, and then through the drying device will be left