论文部分内容阅读
我矿主井提升系统采用容积为1.5米~3的翻转式双箕斗。计量洞室由人工操作计量,总提升高度为98.4米,罐道为15公斤/米的钢轨。提升绞车是洛阳矿山机器厂出品的XKT2×2×1B-20型提升机。配套电控是天津电器控制设备厂出品的TKD—0156控制设备。 该装置一九七四年安装投产后,在原成套设备的基础上陆续作了一些增改,实现了自动控制。以试运行的情况同原来人工半自控相比,主要有以下几方面好处: 1.主减速、爬行及停车阶段运行平稳性好; 2.停车、换向准确,消灭了过卷事故;
Mine main shaft hoist system uses a volume of 1.5 m ~ 3 flip double skip. Measurement of caverns by manual measurement, the total lifting height of 98.4 meters, 15 kilograms of cans for the rail. Lifting winch is Luoyang Mining Machinery Factory produced XKT2 × 2 × 1B-20-type hoist. Supporting electronic control is produced by Tianjin Electric Control Equipment Factory TKD-0156 control equipment. After the installation of the device was put into operation in 1974, some changes were made on the basis of the original complete sets of equipment to realize automatic control. In order to trial operation compared with the original artificial semi-automatic control, mainly in the following areas: 1. The main deceleration, crawling and parking phase running well; 2. Parking, reversing accurate, eliminating the accident over the roll;