论文部分内容阅读
1001磁盘存贮器是由一台立式磁盘、读写放大器和伺服驱动电路及控制逻辑等几部分组成。其中读写放大器和伺服驱动电路直接安放在磁盘机箱内,整台磁盘体积为750×690×1190毫米~3。 1001磁盘采用6片盘组,共有十个记录面,盘片直径为380毫米,内径为160毫米,厚度为2毫米,基体采用硬铝,在表面甩涂一层三氧化二铁胶,厚度控制在3—4微米,磁胶的Hc约320奥斯特,Br约1000高斯,片与片之间的间隔约15毫米。
1001 disk memory is composed of a vertical disk, read and write amplifier and servo drive circuit and control logic and other parts. Which read and write amplifier and servo drive circuit placed directly in the disk enclosure, the entire disk volume of 750 × 690 × 1190 mm ~ 3. 1001 disk with 6 disk set, a total of 10 recording surface, the disk diameter of 380 mm, an inner diameter of 160 mm, a thickness of 2 mm, the base of hard aluminum, coated with a layer of iron oxide on the surface of the thickness control At 3-4 microns, the magnet Hc is about 320 Oe and Br is about 1000 Gauss. The spacing between the slices is about 15 mm.