【摘 要】
：
The application of MicroLogixTM 1200 PLC made by American AB Company in battery automatic production line located in Inner Mongolia Rare Earth Ovonic High-Power
【机 构】
：
Inner Mongolia Rare Earth Ovonic High-Power MH/Ni Battery Co.
论文部分内容阅读
The application of MicroLogixTM 1200 PLC made by American AB Company in battery automatic production line located in Inner Mongolia Rare Earth Ovonic High-Power MH/Ni Battery Co., Ltd was introduced.OCV namely open circuit voltage could be somewhat different because of the build materials of negative electrode, positive electrode and electrolyte.So OCV test can check the voltage value of electrolyte filled cells and figure out if the value is within the process specification.MicroLogixTM 1200 relay output type PLC, DeviceNet communication card, variable speed driver, Panelview 1000 color touch screen and some other hardwares were chosen.Then programme by using RSLOGIX500 software, a flexible and skillful use of shift and XOR command in PLC system can make the equipments realize the high automation.Through DeviceNet network based on CAN and with the advantages of quick response and high reliability transmit the information to supervise and control master panel, the system with these components can successfully realize proceeding the battery OCV test and control.The equipments are running stably, locating and test accuracy satisfy the process request.
其他文献
In the present work investigations have been made to see the role of metal oxides on the performance of the silver metal oxides electrical contact materials. Si
Recent research activities on the formation of micro-defects and porosity in organic coatings were reviewed. The mechanisms of aggressive ionic conduction throu
The oxidation of specimens with thermal barrier coating (TBC) consisted of nickel-base superalloy, low-pressure plasma sprayed Ni-28Cr-6Al-0.4Y (wt pct) bond co
The n-SiO2/Ni composite electro-brush plating coating was prepared on the 1045 steel substrate. SEM and TEM were utilized to analyze the surface and cross-secti
In research of YBCO coated conductors, the development of a oxide template for epitaxial growth of YBCO is very important. Matsumoto et al have demonstrated the
The influence of surface pre-treatments, shot-peening (SP) and laser remelting (LR), on oxygen permeation behaviors of titanium alloy TC11 was investigated. Opt
Composite coatings were obtained on A3 steel by hot dipping aluminum(HDA) at 720 ℃ for 6 min and micro-plasma oxidation(MPO) in alkali electrolyte. The surface
Glass and glass-ceramic materials were investigated as SOFC seals at 800 ～ 850 ℃. The material was based on the glass and glass-ceramic in the BaO-CaO-Al2O3-SiO
The effects of yttrium and cerium on microstructures and properties of Nb-Si system composites were investigated by scanning electron microscopy( SEM), energy d
Surface finishing is one of the most important processes in mould and die making. This process is necessary not only for smoothing the surface of die or mould,