根据本厂的实践经验,下面介绍砂轮静平衡的方法。 1.砂轮在平衡架上静止时,砂轮的最下方(即A点)必然是重点,对称点B是轻点。平衡块3加入上方平衡槽内,把平衡块1和2分别加在距平衡块3的45°处(见图1)。 2.砂轮转动90°,使砂轮处于图2所示的位置,调整平衡块 According to the factory’s practical experience, the following describes the wheel static balance method. 1. When the grinding wheel is stationary on the balance frame, the bottom of the grinding wheel (point A) must be the focus, and the symmetry point B is the light point. The balancer 3 is added to the upper balancer, and the balancers 1 and 2 are respectively added to the balancer 3 at 45 ° (see Fig. 1). 2. Wheel rotated 90 °, so that the wheel shown in Figure 2 position, adjust the balance block