我厂先进磨工林德时同志,在保证质量,提高产量的条件下,根据生产需要,大胆革新,终于创造了一台简易四轴球面研磨机。改变了过去一直用手工研磨的方法,从而解决了关键,使生产效率提高48倍。一、机床结构研磨机的床身1(如图1)是一个方形木架,在它内部的下面装一个电动机;电动机轴上装有与中间轴相连的皮带轮6(如图3)。在床身两侧下安有两个工作台2,每个工作台上有两组研磨装置,因此能同时研磨四个工件。研磨机的主轴部分如图2所示,每个 Our factory advanced grinder Linde Shi comrades, in ensuring the quality, increase production conditions, according to production needs, bold innovation, and finally created a simple four-axis spherical grinding machine. Changed the past has been the method of manual grinding, which solved the key, so that production efficiency increased 48 times. First, the machine structure Grinder bed 1 (Figure 1) is a square wooden frame, under its interior to install a motor; motor shaft is equipped with a pulley connected to the intermediate shaft 6 (Figure 3). Two work benches 2 are located under both sides of the bed, with two grinding sets on each worktable, so that four workpieces can be ground simultaneously. The main part of the grinder shown in Figure 2, each