PART Ⅱ OPTIMUM REFLUX RATIO AND PACKING SIZE

来源 :Chinese Journal of Chemical Engineering | 被引量 : 0次 | 上传用户:qxd986319
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
It has been well-known that the optimum reflux ratio and the optimum packing size are importantcharacteristics of a packed column,especially for close-boiling fractionation.A correlation is proposed toestimate the NTU at finite reflux and from which a relationship to find the optimum reflux ratio is de-rived based on minimum cost.It is found that the maximum value of optimum reflux ratio is about 1.4R_M.For the study of optimum packing size,experimental work is undertaken with n-heptane-methylcyclohex-ane system in four laboratory columns ranging from 20 to 44 mm in diameter and being packed with 2.5×2.5mm angular helices.The optimum ratio of column diameter to packing size is found to be 13-14which is in rough agreement with that for ordinary or industrial size of packing. It has been well-known that the optimum reflux ratio and the optimum packing size are importantcharacteristics of a packed column, especially for close-boiling fractionation. A correlation is proposed to astimate the NTU at finite reflux and from which a relationship to find the optimum ratio is de-rived based on minimum cost. It is found that the maximum value of optimum reflux ratio is about 1.4R_M.For the study of optimum packing size, experimental work is undertaken with n-heptane-methylcyclohex-ane system in four laboratory columns ranging from 20 to 44 mm in diameter and being packed with 2.5 × 2.5 mm angular helices. The optimum ratio of column diameter to packing size is found to be 13-14which is in rough agreement with that for ordinary or industrial size of packing.
其他文献
湍流喉管是装在化油器底部、进气支管上方的易产生湍流的装置(图1)。图1化油器与湍流喉管它可使混合气二次雾化,加速产生湍 Turbulent throat pipe is installed on the bo
我厂原有三台LSG0.2—5型立式水管锅炉,炉型落后,采用固定安排自然通风,手工操作。排烟温度高达600℃,灰渣含碳量高于15%,热效率低于50%,烟囱冒黑烟污染严重。 为提高锅炉效率
在当今激烈的市场竞争中,以避免现金流管理失控而危及企业生存,提升企业的资金管理水平已经成为现代企业财务管理的关键。银行现金管理的出现,为企业现金管理提供了一项全新
在推导住宅建筑供热热平衡方程式中,发现平均有效传热系数和体形系数是影响建筑耗能的两个因素。在围护结构热阻值一定的情况下,影响建筑物耗能的主要因素是体形系数。为了节
脉冲涡轮增压柴油机喷咀环面积的理论计算是一个尚朱正确解决的问题。为此,作者统计了国内四冲程涡轮增压柴油机,及二冲程纯涡轮增压柴油机的有关实验参数与结构参数,并通过
“在他们的眼里,整个大地都是交易所;在这块土地上,他们除了要比自己的邻居富有以外,没有别的使命;生意控制了他们的全部思想,一种生意换成另一种生意,是他们唯一的休息;即使
我厂购买的 RJJ-75-9T 井式气体渗碳炉在使用中发现风扇轴漏气,通过学习外单位的经验,搞成了水冷轴承凹凸式密封套,结构见图1。经三年多的使用,效果很好。只要轴承和上、中
本文导出了最一般的双筋T形或工形截面部分预应力砼梁开裂后截面中和轴高度的基本方程,并对其作了分析讨论。为简化三次方程的求解,且保证有足够的计算精度,文中给出了三次逼
特劳特先生准确地把战争和商战的一个共同点呈现出来,就是“进攻和防守”。这正符合太极思维最核心的方法——阴阳之道。优秀的企业在商战过程中,总是阳性策略和阴性策略同时
我厂生产3系列齿轮泵已有十几年历史。在长期的生产实践中,我们发现一个现象:根据同一图纸,在相同的工艺条件下,用同一批合格零件在相同条件下装配,其结果是产品性能指标差