位于结晶器上方的中间包在连铸装置中主要是用于从钢水包中接受钢水,并将其浇注到结晶器中去。因此,在浇注金属的过程中,应该保证其灵活方便地靠近结晶器和便于在水口冻结时进行烧穿清理。在浇注结束后将中间包运走,将其余的金属和钢渣排到盛渣桶中,在发生事故时,例如,在浇注时打不开塞棒时,也需要这样作。在现有的连续铸钢机上,所有的与中间包有关的工序都用升降旋转台或专门的小车完成。但是,这些装置不能很好地完成这些工序。例如在连铸机上采用升降旋转台的情况下,所有的运输工序,以及沉重的安装工作和中间包的调整都要用吊车。在目前的连铸机上采用一种专门的中间包小车就不需要用吊车将中间包运往结晶器。但是,它们使 The tundish located above the crystallizer in the continuous casting plant is used primarily for receiving the molten steel from the ladle and pouring it into the mold. Therefore, in the process of pouring metal, should ensure that it is flexible and convenient near the mold and to facilitate the burn-through cleaning when the nozzle is frozen. The tundish is removed after pouring, and the rest of the metal and slag is discharged into the ladle, which is also required in the event of an accident, for example, when the stopper is not open during pouring. On existing continuous casting machines, all the tundish-related processes are done with a lifting table or a special trolley. However, these devices do not perform well in these processes. For example, in the continuous casting machine with lifting table, all transport processes, as well as heavy installation and tundish adjustments are used cranes. Using a specialized tundish trolley on the current caster does not require the use of a crane to transport the tundish to the mold. However, they make it