论文部分内容阅读
正在研制中的六种加气混凝土切割机由简易轻巧到多能大型,各具特色。3米梳齿式砌块切割机(上海硅酸盐制品厂),带模切割,采用梳齿切割装置,自上而下,纵、横切割一次完成;3.3米切割机(哈尔滨市硅酸盐制品厂),脱模切割,采用门架斜拉钢丝四轮滑车导向纵切,翻转框架振动钢丝横切,单面铣槽加工;3.6米切割机(北京加气混凝土厂),脱模切割,采用低负压吸盘取坯,门架垂直钢丝移动纵切,翻转框架振动钢丝横切;4米卷切式切割机(上海杨浦煤渣砖厂),脱模切割,负压吊具运送无底板坯体,采用纵、横预铺钢丝,小车移动纵向钢丝卷切,翻转框架横向钢丝卷切;4米切割机(齐铁加气混凝土厂),脱模切割,采用顶杆式斜拉钢丝纵切,框架水平钢丝垂直下移横切;6米翻转式切割机(哈尔滨市建筑工业加工厂),脱模切割,采用翻转台将坯体翻转立起,水平小车平行钢丝移动纵切,框架水平钢丝垂直下移横切,双面铣槽加工。
The six kinds of aerated concrete cutting machines under development are simple and lightweight to multi-energy large and each has its own characteristics. 3m Comb Block Block Cutting Machine (Shanghai Silicate Product Factory), with die cutting, using comb cutting device, from top to bottom, vertical and horizontal cutting once completed; 3.3 meters cutting machine (Harbin silicate Product factory), demoulding and cutting, adopting gantry diagonal drawing wire four-wheel pulley guide slitting, overturn frame vibrating wire cross-cutting, single-side milling slot machining; 3.6m cutting machine (Beijing Aerated Concrete Factory), demolding and cutting, Using a low suction cup to take blanks, the vertical wire of the gantry moves longitudinally, and the frame is traversed by a vibrating steel wire; the 4m roll-cutting machine (Shanghai Yangpu Coal Clinker Factory), demoulding and cutting, and the negative pressure spreader conveys no slabs The body adopts vertical and horizontal pre-plating steel wire, the trolley moves the longitudinal steel wire roll cut, and the inverted frame horizontal steel wire roll cut; the 4 meter cutting machine (Qitie Air-filled Concrete Factory), demoulding and cutting, adopts the top rod type diagonal cable longitudinal slitting. , The horizontal steel wire of the frame is moved vertically downwards; the 6-meter turning type cutting machine (Harbin Construction Industry Factory) is used for demoulding and cutting. The blank body is turned upside down with the turning platform, and the horizontal car is moved with the horizontal steel wire and the horizontal wire of the frame is cut. Vertically cross-cut down, double-sided milling.