论文部分内容阅读
联邦德国Badische Stahlwerke AG的BSW炼钢厂有两条电炉炼钢生产线。它由堆料厂、废钢预热炉、超高功率电孤炉、合金元素添加设备、钢包炉、钢包车、连续浇铸器等设备组成。生产工艺水平与自动化程度都比较高。 1983年,BSW决定对生产线上的一台电弧炉实施偏心底出钢技术改造。在准备砌筑带有偏心底出钢炉口的新炉底时,需对原设计作如下修改: 改造出钢口处的可倾托架结构;砌筑偏心底出钢型的炉底;改造底部出钢口处的炉壳;增装铜制水冷护墙板;配置钢包车。
The BSW steelworks at Badische Stahlwerke AG in the Federal Republic of Germany have two EAF production lines. It consists of stacking plant, scrap preheating furnace, ultra-high power electric arc furnace, alloying element addition equipment, ladle furnace, ladle car, continuous casting equipment and other equipment. The level of production technology and automation are relatively high. In 1983, BSW decided to implement an eccentric bottom tapping technology retrofit on an electric arc furnace on the production line. When preparing a new furnace bottom with an eccentric bottom tapping furnace opening, the original design needs to be modified as follows: revamp of the tiltable pallet structure at the tapping hole; masonry bottom of eccentric tapping furnace; alteration Furnace shell at the bottom of the tapping hole; additional copper water-cooled wall panels; ladle car configuration.