论文部分内容阅读
本文首先简要地介绍浇铸型锡青铜镶嵌石墨轴承。这种轴承系由自润滑性能良好的优质人造石墨材料与具有良好耐磨性能的ZQSn6-6-3锡青铜在熔融状态下按照设计的形状浇铸复合后加工而成。这是一种在高温、低速、重载条件下具有良好耐高温性和耐磨性的新型自润滑轴承,可以广泛地应用于机械、化工、冶金和纺织等部门。 S-60M隧道窑窑车轴承原为我厂自行设计制造的非标准滚针轴承。使用时采用二硫化钼钙脂润滑。由于隧道窑内温度较高,轴承负荷较大,窑车运行一周后,滚针轴承内的
This article begins with a brief introduction of cast-tin bronze inlay graphite bearings. This bearing is made of high quality self-lubricating synthetic graphite material with good wear resistance of ZQSn6-6-3 tin bronze in the molten state, according to the shape of the shape of the composite casting and processing. This is a new self-lubricating bearing with good temperature resistance and wear resistance under high temperature, low speed and heavy load. It can be widely used in machinery, chemical, metallurgy and textile industries. S-60M tunnel kiln car bearings originally designed and manufactured by our factory non-standard needle roller bearings. When used with molybdenum disulfide grease lubrication. As the tunnel kiln temperature is higher, the bearing load is larger, kiln car running a week later, the needle roller bearings