民用飞机导光板自适应调光控制系统设计

来源 :航空工程进展 | 被引量 : 0次 | 上传用户:guansea
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
目前,民用飞机驾驶舱内导光板照明采用手动亮度调节的方式,既增加了驾驶员的负担,又不易根据驾驶舱光环境精准控制导光板的亮度。提出一种新颖的数字式导光板自适应调光控制系统,该系统通过光照传感器准确检测环境光照度,并利用自适应调光控制器根据亮度曲线模型计算驾驶舱内各路导光板的亮度,结合手动补偿及PWM调光控制技术,最终实现导光板亮度的自适应调节。基于上述方案,完成系统架构设计和主要部件的方案设计,并通过仿真,验证所设计的自适应调光控制系统可实现预期目标,能够精准地自适应调整导光板亮度,为改善飞机导光板照明系统人机工效提供有效途径。 At present, the light regulation of the light guide plate in the cockpit of a commercial aircraft adopts the method of manual brightness adjustment, which not only increases the driver’s burden but also makes it difficult to precisely control the brightness of the light guide plate according to the cockpit light environment. A novel digital light guide plate adaptive dimming control system is proposed. The system detects the ambient light illumination accurately by the light sensor, and calculates the brightness of each light guide plate in the cockpit by the adaptive dimming controller according to the brightness curve model. Manual compensation and PWM dimming control technology, the ultimate realization of the light guide plate brightness adaptive adjustment. Based on the above scheme, the design of the system architecture and the design of the main components are completed. Through the simulation and verification, the designed adaptive dimming control system can achieve the expected goal, and the brightness of the light guide plate can be accurately and adaptively adjusted. In order to improve the illumination of the light guide plate of the aircraft, System ergonomics provide an effective way.
其他文献
升力风扇无人机具有独特的动力系统,对升力风扇无人机着陆过程的动力补偿系统的设计与分析显得尤为重要。建立升力风扇无人机纵向状态方程并进行简化,在此基础上构建动力补偿
1前言1994年,采用光纤同轴电缆混合(HFC)拓扑结构的宽带接入技术取得了重大的进展.HFC网络结构的提出,不仅解决了传统的电缆有线电视广播业务传输距离受限的问题,而且通过采
原深圳有线广播电视台于1996年8月29日开始进行有线宽带数据传输业务试验;2000年4月全面开始HFC网络的光节点划小和5~860MHz双向改造;2001年9月开始进行CMTS头端的招标和建设,