盆景树桩,在必须拿弯的枝干已超过需要拿程度的柔软性时,为使枝干在拿弯扭曲处降低屈侧的压力及伸侧的张力,以便较易拿弯及拿弯后快速定型,笔者采用在枝干准备拿弯处之一侧(屈侧方及伸侧方均可),用锋利的刀片,连树皮带木质,斜向12度至15度角切开至近枝径约1/3至2/5左右,切成游离皮瓣,好象舌头的样子(皮舌)。待切好的游离“皮舌”恢复原位后,再拿弯扭曲造型,这种方法称为“半边舌状瓣 Bonsai tree stump, in the must take the branches have been bent over the need to take the degree of softness, in order to make the branches bend in the bend to reduce the yield pressure and extension side of the tension, so that easier to take and take a quick bend after the bend Stereotypes, I used to prepare the branch to take one corner of the bend (flexor side and extension side can be), with a sharp blade, and even the bark of wood, oblique angle of 12 degrees to 15 degrees cut to the nearest branch diameter about 1/3 to 2/5 or so, cut into free flaps, as if the tongue (tongue). To be cut after the free “skin tongue” restored to its original position, then take a twist shape, this method is called "half tongue flap