本文介绍的方法,仅需要台钳和一件角度垫块,就能很方便地铣一些特殊零件上的六角形。这里介绍的是铣一种杯形的盖帽零件,省去了按装回转工作台和分度头的时间。角度垫块的一边必须铣成30°角,其它尺寸可按所铣零件的尺寸确定。加工时的工艺步骤:将零件夹在台钳上,先铣第一个平面,然后将第一个平面靠在垫 This article describes the method, only the need for a vise and angle pad, you can easily mill some hexagons on special parts. Introduced here is milling a cup-shaped cap parts, eliminating the need to install rotary table and indexing time. One side of the angle pad must be milled to a 30 ° angle. Other dimensions can be determined by the size of the part being milled. Processing process steps: the parts caught in the vise, the first plane milling, and then the first plane against the pad