论文部分内容阅读
合盛1Z系列微耕机合盛1Z系列微耕机,是以小型内燃机为动力装置的自走式耕作机械,适用于平原、丘陵及山地大棚、园林、蔬菜地及小块农田耕种及管理作业。1Z-35/105型微耕机。以柴油机为发动机。结构配置及用途:①旋耕。微耕机行走机构传动轴左右分别用M8×55螺栓装有轴向定位旋耕装置组件,可进行旋耕作业。②开沟起垄。取下调速装置,装上开沟器,调节好开沟器宽度和高度,可进行开沟作业。③短途运输。将车箱前臂装在行走箱的拖挂体上,并在行走机构传动轴上安装行走轮,可进行运输作业,额定载质量250kg,快挡速度约10km/h、慢挡速度约5km/h。④多功能作业。取下变速箱保护罩,旋出主轴后端螺栓,取出轴键套,将配套胶带轮或联轴器装在
He Sheng 1Z series of micro tillers He Sheng 1Z series of micro tillers, is a small internal combustion engine powered device for self-propelled farming machinery, suitable for plains, hills and mountain greenhouses, gardens, vegetable fields and small farmland cultivation and management operations . 1Z-35/105 type tiller. Diesel engine. Structure configuration and use: ① Rotary. Tilting machine drive shaft around the M8 × 55 bolts were equipped with axial positioning rotary tillage device components, rotary tillage operations. ② ditching ridge. Remove the governor, install the opener, adjust the opener width and height, and open the ditches. ③ short-distance transport. The front arm of the car is mounted on the trolley body of the travel case, and the traveling wheel is mounted on the transmission shaft of the traveling body to carry the transportation work. The rated load mass is 250kg, the fast gear speed is about 10km / h and the slow gear speed is about 5km / h. ④ multi-purpose operation. Remove the gearbox cover, unscrew the rear end of the spindle bolt, remove the shaft key sleeve, the supporting tape wheel or coupling installed