论文部分内容阅读
在3302厂设计中的废汽利用系统为:水压机与汽锤之废汽,分别经两组机械的填料收容装置与油分离装置,送到废汽蓄汽器中;然后,直接以处理后的废汽供给锻压、铸钢等五个车间之采暖与通风及锻压车间淋浴需要。在设计中并有自动控制设备,作为废汽量不足时及时地补充新蒸汽之用。但1956年由于废汽蓄汽器及自动控制设备尚未到货或施工,以致废汽利用系统不能正式投入运转,这就影响到全厂采暖供汽的不足。为此,我们研究了苏联重型机器设计院关于废汽回收的指导资料,并实
The waste steam utilization system in the design of the 3,302 plant is: the waste steam of the hydraulic press and the steam hammer, which is sent to the waste steam accumulator by two sets of mechanical packing receiving devices and oil separation devices, respectively, and then directly processed. Waste steam supply for heating and ventilation in five workshops, such as forging and cast steel, and showering needs in forging workshops. In the design, there is automatic control equipment, which can be used to supplement new steam in time when the amount of steam is insufficient. However, in 1956, due to waste steam storage and automatic control equipment has not yet arrived or construction, so that waste gas utilization system can not be officially put into operation, which affects the entire plant heating steam supply deficiencies. To this end, we studied the guidance materials of the Soviet Heavy Machinery Design Institute on waste gas recovery and