激光能量穿过大气层的传输过程

来源 :激光与光电子学进展 | 被引量 : 0次 | 上传用户:miao4701730
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
空间太阳能电站(SSPS)方案之一是采用激光束实现天-地能量传输。研究激光能量传输的可行性,需要对激光束穿过大气层的过程进行分析。理论分析并数据模拟了激光在大气层中传输的过程,分析了大气在不同高度处对激光的作用,计算了不同高度处的激光光强和分布,同时分析了相应的大气温度和折射率的变化规律。研究发现,利用激光实现大气层垂直方向上的能量传输,需要控制激光的功率密度在一定范围,以减小能量的损失,同时避免对大气产生明显影响。在一定传输功率下,可以通过增加光束口径来减小激光的功率密度。 One of the Space Solar Power Station (SSPS) programs is the use of laser beams for day-to-Earth energy transfer. To study the feasibility of laser energy transmission, the process of laser beam passing through the atmosphere needs to be analyzed. Theoretical analysis and data simulation of the laser in the atmosphere of the transmission process, the analysis of the atmosphere at different heights on the role of the laser, calculated at different altitudes of the laser light intensity and distribution, while analyzing the corresponding changes in atmospheric temperature and refractive index law. The study found that the use of laser to achieve the vertical transfer of energy in the atmosphere requires that the power density of the laser be controlled within a certain range in order to reduce the energy loss while avoiding significant impact on the atmosphere. In a certain transmission power, you can reduce the laser power density by increasing the beam diameter.
其他文献
自改革开放以来,随着国民经济的不断发展和人们生活水平的不断提高,旅游的发展正在呈现迅猛增长的态势。与此同时,在校大学生的人数也在逐年增加,大学生正处青春年少,喜欢亲
提出了一种利用均匀相位掩模板制作啁啾光纤光栅(FBG)的方法。在对光纤的扫描曝光过程中,相位掩模板沿长度方向周期性抖动,且抖动幅度随光栅扫描长度的变化而变化,使FBG的相
报道了基于空芯光纤的1.5μm光纤气体拉曼激光放大器。实验以一个1.5μm波段的可调谐分布式反馈激光器为种子源,输出的连续波种子激光与1064nm微芯片激光器的输出脉冲抽运激
采用半导体激光器制备了硅基AlGaInP发光二极管,研究了激光能量密度、重复频率及平台加工速度对加工效果的影响,利用电子显微镜等测试工具分析了经激光加工后的硅基LED芯片表
光束合成是突破单路激光功率限制、获得高功率激光输出的重要手段。以亮度为判据,对不同光束合成方法的合成效果进行理论研究,给出了激光光束合成效果的预评价方法。分析了亮