一、巧修离合器拉线 拉线一般从手柄附近铁豆根部断开,铁豆很易丢失。修理时,可找4～5毫米钢管或铜管代替铁豆,如自行车用的前闸杆、羽毛球拍杆等,将其按铁豆长度截取一段,在中部打一与拉线直径相适应的孔。将拉线穿进小孔,并从小管一端拉出少许,再用一铁钉从小管中打进,两端铆死即可(见图1)。使用的铁钉要 First, the clever repair pull the pull wire from the handle near the root of the broken iron, iron is easy to lose. Repair, you can find 4 to 5 mm steel pipe or brass instead of iron beans, such as bicycle front brake lever, badminton racket rod, etc., according to the length of the length of the iron interception of a fight in the middle of the hole diameter and adapt to the hole . Pull the wire into the hole and pull it out a little from one end of the tube. Then use an iron nail to push it in from the tube and riveting it at both ends (see Figure 1). Iron nail to use