升压器一、滑柱式双向升压器图1是它的结构示意图,其动作原理如下:当左边有控制信号时,即薄膜7压紧通道3,则气源一路从左推滑柱向右,此时气源另一路气从右2输出,滑柱右端之空气从右之6及右之4排出,完成一放大作用,如右边控制信号输入,则动作原理同上。 Booster A sliding strut bi-directional booster Figure 1 is its structure diagram, the action principle is as follows: When there is a control signal on the left, that is, the film 7 pressed channel 3, the air source all the way from the left sliding strut column Right, at this time another source of gas source from the right 2 output, right column of air stripping from the right of the right 6 and 4 of the right to complete an amplification, such as the right control signal input, the action principle Ibid.