根据工件边缘,对机床主轴中心线进行调试定位的过程中,通常采用普通的电子或机械式边缘探测器。这种方法通常称为间接定位方法。因为根据工件边缘对主轴中心线进行定位,操作员必须将工作台移动一定的距离,当探测器与工件接触时, According to the edge of the workpiece, the machine tool spindle centerline debugging positioning process, usually using ordinary electronic or mechanical edge detector. This method is often referred to as indirect positioning method. Because the centerline of the spindle is positioned according to the edge of the workpiece, the operator must move the table a certain distance. When the probe touches the workpiece,