我厂是钢结构制作的专业厂家,在制作钢柱、钢梁过程中,通常采用下料→矫正(反变形)→组对→焊接→矫正→刷油工序。在组对焊接时,由于焊工的操作技术水平不等,所以在焊接过程中,有的翼缘板变形过大或过小,需进行矫正。为此,我们设计了防止翼缘板焊接变形的夹具,其结构如附图所示。 Our factory is a professional manufacturer of steel structure, in the production of steel columns, steel beam process, usually cutting → correction (anti-deformation) → group → welding → correction → brushing process. In the group of welding, due to the technical level of the welder’s operation, so in the welding process, some flange plate deformation is too large or too small, need to be corrected. For this reason, we designed a clamp to prevent welding deformation of the flange plate, the structure of which is shown in the attached drawing.