《屋面工程技术规范》讲座之十如何做好刚性防水屋面（下）王寿华（续上期第５１３页）３．４合理分仓．并做好密封处理。新规范规定了防水层分格缝的位置应设在屋面板的支承端、屋面转折处、防水层与突出屋面的交接处，并应与屋面结构层的板缝对齐，使防水层因温差影响、... Tenth Lecture on “Technical Specifications for Roof Engineering” How to Make a Rigid Waterproof Roof (II) Wang Shouhua (Continued in the last issue on page 513) 3.4 Reasonable compartment separation. And do a good deal of sealing. The new code stipulates that the location of the sub-lattice seam of the waterproof layer shall be located at the supporting end of the roof panel, the turning point of the roof, the junction of the waterproof layer and the protruding roof, and shall be aligned with the board seams of the roof structural layer so that the waterproof layer will be affected by the temperature difference. ,...