这里介绍的强力磨削是在普通外圆磨床上,改变砂轮切削性能,对轴类零件磨削时,加大进给量的一种高效率磨削方法。在加工某种零件时,可代替车削加工,其操作工艺如下:一、修整砂轮金钢钻横进给量:0.3～0.5毫米(大颗粒金钢钻);工作台行程:1.5～2米/分(双行程一次成形)。由于修整砂轮时金钢钻进刀深,工作台行程较快,经修整后的砂轮工作面形成网状,如附图所示。砂轮在磨削时与工件的接触面 Powerful grinding introduced here is a high efficiency grinding method that can change the grinding performance of the grinding wheel and grind the shaft parts to increase the feeding amount on the common cylindrical grinder. In the processing of a certain part, you can replace the turning process, the operating process is as follows: First, the grinding wheel feed into the feed rate: 0.3 ~ 0.5 mm (large grain diamond drill); table stroke: 1.5 ~ 2 m / Points (double trip forming). As the grinding wheel when the diamond into the deep, workbench faster stroke, the dressing surface of the grinding wheel to form a mesh, as shown in the figure. Grinding wheel in contact with the workpiece surface