Snyder公司设计和制造了一条六工位的专用自动线,用来加工焊接桔构的汽车后桥壳体(钢质)中间部分,对其管状的两端进行平面力口工、倒棱、球面加工和冲压。这条液压操纵和电气控制的自动线在负荷为100％的情况下,每小时能生产200个壳体。壳体在第一工位上装到步伐式轮送机的V形铁上,然后通过第二空工位而进入第三 Snyder designs and manufactures a six-station dedicated automatic line for the machining of the mid-section of the automotive rear axle housing (steel) welded to the orange structure and for planar forces, chamfering, and spherical machining of the tubular ends And stamping. This hydraulically operated and electrically controlled automatic line produces 200 housings per hour at 100% load. The casing is mounted on the V-shaped iron of the stepper in the first station and then through the second empty station into the third