论文部分内容阅读
Asphalt-rubber pavements often become damaged in high-temperature regions and appear rutted or wavy,and experience slippage.To improve the high-temperature performance of the asphalt-rubber mixture,technical measurements,such as,the optimal adjustment of gradation,technique of composite modification,and control of compaction were investigated.An optimal adjustment of aggregate gradation based on stone matrix asphalt improves the high-temperature stability of the asphaltrubber mixture significantly.Through composite modification,the effect of asphalt-rubber modification was enhanced,and the dynamic stability and relative deformation indices of the asphalt-rubber mixture were improved significantly.Furthermore,compaction parameters had a significant influence on the high-temperature stability of the asphalt-rubber mixture.The rolling times for compacting the asphalt-rubber mixture should be controlled to within 18-20 round-trips at a molding temperature at 180°C;if the rolling time is a 12 round-trip,the compaction temperature of the asphalt-rubber mixture should be controlled between 180 and 190°C.
Asphalt-rubber paments often become damaged in high-temperature regions and appear rutted or wavy, and experience slippage. To improve the high-temperature performance of the asphalt-rubber mixture, technical measurements, such as, the optimal adjustment of gradation, technique of composite modification, and control of compaction were investigated. An optimal adjustment of aggregate gradation based on stone matrix asphalt improves the high-temperature stability of the asphaltrubber mixture significantly. Through composite modification, the effect of asphalt-rubber modification was enhanced, and the dynamic stability and relative deformation indices of the asphalt-rubber mixture were significantly significantly. More than, compaction parameters had a significant influence on the high-temperature stability of the asphalt-rubber mixture. The rolling times for compacting the asphalt-rubber mixture should be controlled to within 18-20 round-trips at a molding temperature at 180 ° C; if the rolling time is a 12 round-trip, the compaction temperature of the asphalt-rubber mixture should be controlled between 180 and 190 ° C.