7、大型鲍姆跳汰机系统图7和图8以图解法比较了500吨/时跳汰机单机系统和250吨/时跳汰机双机系统对空间布置的不同要求,图7表示了对转载点的高度要求。两台250吨/时跳汰机的系统,如果布置得当,其转载点的高度要求同一台500吨/时的跳汰机将没有什么差别,但是,如果在某个转载点上出现一股料流分为两股的情况,例如,一个给煤 7. Large Baum Jig System Figure 7 and Figure 8 graphically compare the different requirements for the spatial arrangement of a 500 t / jig single machine system and a 250 t / jig dual machine system. Figure 7 shows The height of the transfer point requirements. Two 250 tonne / hour jig systems, if properly laid out, will require no difference in height at the point of transfer to the same 500 tonne / hour jig, however, if there is a charge at one of the transfer points Flow divided into two shares of the case, for example, a coal