赤芍总苷纳米混悬剂的制备、表征及药动学评价

来源 :中国药学(英文版) | 被引量 : 0次 | 上传用户:xiaomeitomei
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
赤芍总苷是从赤芍中得到的有效部位,它具有许多的生物学活性.然而,由于其溶解性差,生物利用度也非常低,使其应用受到限制.本研究将赤芍总苷制备成纳米混悬剂以增加溶解度,提高其口服生物利用度.采用沉淀-高压均质法制备赤芍总苷纳米混悬剂.用动态光散射法(DLS)测定其粒径、Zeta电位分别为(210.2±2.5) nm,(-22.4±1.2) mV.差示扫描量热图(DSC)结果显示,TPG在混悬剂中呈晶体状态,晶型并未改变.透射电镜(TEM)结果表明赤芍总苷纳米混悬剂呈球状晶体.采用液相色谱串联质谱法(LC-MS/MS)测定赤芍总苷纳米混悬剂在大鼠体内药物动力学参数,与赤芍总苷混悬液组药物动力学数据相比,AUC0-∞明显增大(约1.85倍),表明赤芍总苷纳米混悬剂可以提高赤芍总苷的生物利用度,是一种很有前景的给药体系.“,”Total paeony glycoside (TPG) is obtained from Radix Paeoniae Rubra with a variety of bioactivities.However,the low solubility and bioavailability limit its application.The present study aimed to develop TPG nanocrystals to increase the dissolution and then improve the oral bioavailability.TPG nanocrystals were prepared via precipitation and high-pressure homogenization method.The physical-chemical properties of the optimal TPG nanocrystals in terms of particle size,zeta potential,morphology and crystallinity were evaluated.The results showed that TPG nanocrystals had a mean particle size of(210.2±2.5) nm,a polydispersity index of 0.191±0.033 and a zeta potential of (-22.4±1.2) inV.The result of differential scanning calorimetry showed that the nanocrystals were still in crystalline state after the preparation procedure.Transmission electron microscopy (TEM) results showed that the nanosuspension was in spherical shape.The pharmacokinetics of TPG nanocrystals for rats was investigated by liquid chromatography-tandem mass spectroscopy (LC-MS/MS).Compared with the TPG coarse suspension,TPG nanocrystals exhibited significant increase in A UC0-∞ (approximately 1.85-fold).Taken together,TPG nanocrystals could be used as a promising drug delivery system due to the enhanced oral bioavailability of TPG.
其他文献
期刊
@@
本文研究了蒙皮结构在考虑蒙皮效应后的抗剪性能,针对在蒙皮结构中对其影响的关键因素进行分析研究.进一步对多因素影响进行回归分析,得出蒙皮效应影响因素的回归公式,以方便在
结合工程实例,文章阐述了存在强度变异钢材的屈服强度及设计值的确定方法.由试验数据并结合理论分析重新确定钢材材料强度.最后探讨了针对实际工程框架柱的承载力不足时的加固
在某钢框架结构体系中前部屋盖周围将悬挂高度不等的百叶,为了达到建筑设计悬挂百叶的效果要求,并考虑到结构的安全性,需要对实际已成形的钢结构系统进行分析验算.对不满足安全
本文以一栋高层建筑屋面上增设的附属塔形钢结构为对象.采用3D3S软件对结构进行分离计算和整体计算.详细阐述了分析过程以及应注意的问题,通过对两种计算方法得出结果的分析对
期刊
@@
由于某框架结构需要进行部分构件使用性能检测特根据建筑物的特点,选取最不利的构件进行部分构件使用性能检测.
本研究开发了一种简单可靠的HPLC-UV方法用于美氟尼酮的测定.生物分析步骤包括从500 μL肝微粒体系统中通过甲醇沉淀蛋白质提取美氟尼酮.色谱条件:色谱柱为Agilent TC-C18柱(
对于Q345C低合金钢制作某广电枢纽大厦H型结构件过程中出现焊缝裂纹的原因、性质进行了分析,探讨了裂纹产生的影响因素及解决措施,以保证达到此工程钢结构制作的质量.
2018年5月17日,应分子与细胞药理学系余四旺副教授邀请,美国Rutgers新泽西州立大学药学院江亚伍(Tony Ah-Ng Kong)教授来我院访问交流,并在药学院作了题为“Epigenome Studie
期刊