掺杂聚合物蓝光发光二极管

来源 :光学学报 | 被引量 : 0次 | 上传用户:zzbluebus
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
报道了用有机染料TPB(1,l,4,4-四苯基丁二烯)分散到PVK(聚乙烯基咔唑)中的掺杂聚合物作有源层制作的蓝光发光二极管及其发光特性。聚合物发光层用旋转涂敷的方法制备,用透明导电材料ITO(铟锡氧化物)、金属Al作为正负电极。器件正向偏压为13V时,可以看到蓝光发射,峰值波长为455nm,注入电流为50mA/cm2时,亮度为44cd/m2。 A blue light-emitting diode made of a doped polymer dispersed in PVK (polyvinylcarbazole) as an active layer with an organic dye TPB (1,1,4,4-tetraphenylbutadiene) and its luminescence characteristic. The polymer light-emitting layer was prepared by a spin coating method using a transparent conductive material of ITO (indium tin oxide) and metal Al as positive and negative electrodes. When the device is forward biased at 13V, blue emission can be seen with a peak wavelength of 455nm and a luminance of 44cd / m2 at an injection current of 50mA / cm2.
其他文献
对Nd3+:YAG1.3μm波段的脉冲激光器进行了特性分析和实验研制。尤其是输出腔镜的最佳透过率的选择,谐振腔类型的选择,以及与1.06μm脉冲器件的比较和改造。文中给出了最佳透过率,1.32um,1.34um两波长激光能量与